Sta-Rite D Series Cast Iron Self Priming Pump, DHJ3-170, 5HP, 3 Phase, High Head

Especially designed for commercial and public swimming pools and spas, aquatic facilities, water parks and fountain applications where high performance and self-priming characteristics are desired. These self-priming, high performance pumps are available in high head and medium head models, providing a complete range of performance characteristics. Motors are open drip-proof, continuous duty rated 3450 RPM.

Features:

• Back pull-out design allows entire motor to be removed for servicing impeller, seal or motor without disturbing plumbing.
• Suitable for outdoor installation.
• Precision cast and machined bronze impeller is dynamically balanced for long seal life and quiet operation. Non-overloading.
• Single phase models are 230V. Three phase models are 230/460V.
• 3 HP medium head models have 2" discharge port. 5 HP medium head models have 2.5" discharge port.
• 3 HP high head models have 1.5" discharge port. 5 HP high head models have 2" discharge port.

This item ships by Truck. Additional charges will apply if the following services are required:

• Shipment to a residential or military base address (charge varies, approximately $40 to $100)
• Shipment requiring inside delivery or a lift gate (charge varies, approximately $75 to $125)
• Expedited Service

Please specify during the checkout process in the Comment/Note section if you will need any additional services (such as those listed above) upon delivery. You will be contacted for approval prior to processing your order if any additional charges apply.