Duraflex Diving Board Refinishing Service
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge
Duraflex

Duraflex Diving Board Refinishing Service

Item Number: HHREFIN42

Replace the slip-resistant surface on your diving board before a slipping accident occurs. The length of time before refinishing becomes necessary depends on the amount and kind of traffic, care in handling and storage, environmental conditions and following the maintenance instructions. If the diving board is slippery, take it out of service immediately and contact a Duraflex dealer for refinishing.

Examine your board carefully for gouges and cracks. Duraflex will not refinish any board with the following issues:

  • Any cracks in the ribs, surface, slots, or torsion box
  • Excessive corrosion anywhere on the board
  • Excessive material applied to the board including paint of any kind
  • Excessive droop. Excessive droop happens when a board takes a permanent downward bend largely dueto trampolining the board. Because FINA no longer allows a minus dimension in board-to-water height, anything over one-inch droop will be considered excessive.

Charges for Refinishing include a Board bolt kit & new Rubber Channels. Photos may be required prior to shipping to Duraflex for refinishing. Duraflex will require the board in their factory for approximately 4-6 weeks.

  • Contact us for pricing

  • Availability: Contact us for availability information

This item is eligible for return.

Duraflex parts, in new and unused condition are eligible for return at the discretion of the manufacturer. A restocking fee of 15% will apply for all returned parts. Authorized returns are subject to physical inspection to determine the conditions of the item. Below is a list of possible return scenarios and exceptions:

  • If the item has never been used or installed and is in good condition when it arrives at the manufacturer, the return is authorized and subject to a restocking fee.
  • If the item arrives with shipping/freight damage, but is repairable, the return may be authorized and subject to a restocking fee and any additional refinish/repair costs.
  • If the item arrives with shipping/freight damage, and is not repairable, the return will not be authorized. A claim with the freight carrier should be filed.
  • If the item arrives with signs of use or installation, the return will not be authorized.

Contact us to obtain a Return Authorization.

Your Browsing History

Aqua Creek Pull Out Leg Rest (Select Color)
Aqua Creek Pull Out Leg Rest (Select Color)
WaterLink Spin Touch Lab
WaterLink Spin Touch Lab
  • $1,202.01 /EA
Rola-Chem Side Mount Flow Meter for PVC Pipe, 1"
Rola-Chem Side Mount Flow Meter for PVC Pipe, 1"
Stanchion Socket - Paragon Stainless Steel
Stanchion Socket - Paragon Stainless Steel
  • $213.32 /EA