Grab Rails - Paragon Pretzel Bend, .109"

Competition pools require unobstructed racing lines and steps built into the wall. Grab rails are necessary in order to use these steps safely. All grab rails are made of one continuous length of smooth, corrosion resistant, T304 stainless steel pipe, 1.9" diameter, with wrinkle-free bends. The heavier the traffic, the heavier the tubing that you should select. Custom designs available upon request. Specification sheets also available on request. Priced per pair.

Order separately: Four 4" deep bronze wedge anchor sockets and escutcheon plates for each pair of grab rails.

Pretzel Bend Rails require the least amount of deck width. Can usually be mounted on the pool wall rather than the deck slab. They have the most narrow profile as the legs are offset laterally instead of front to back.

• 30201 – .145" wall × 1.9" OD
• 30202 – .109" wall × 1.9" OD
• 30203 – .065" wall × 1.9" OD

This item ships by Truck. Additional charges will apply if the following services are required:

• Shipment to a residential or military base address (charge varies, approximately $40 to $100)
• Shipment requiring inside delivery or a lift gate (charge varies, approximately $75 to $125)
• Expedited Service

Please specify during the checkout process in the Comment/Note section if you will need any additional services (such as those listed above) upon delivery. You will be contacted for approval prior to processing your order if any additional charges apply.