Natural Chemistry Instant Pool Water Conditioner, Gallon

Natural Chemistry's Instant Pool Water Conditioner is used for stabilizing chlorine from UV sunlight loss. It begins working to protect chlorine the instant it is added to the pool. Regular cyanuric acid with a pH of 2.8 is very acidic and it takes from 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system, depending on the method of application. Natural Chemistry's Instant Pool Water Conditioner is not an acid (it's a salt) and has a pool friendly pH, so it will not damage pool surfaces or equipment.

Dosage:

1 gallon of Instant Pool Water Conditioner raises CYA levels by 32 ppm per 10,000 gallons.

How to Apply:

1. Shake well
2. With circulation pump running, slowly pour Instant Pool Water Conditioner into pool skimmer or pour directly into pool water, while walking around the edge of pool. Brush to speed dispersal of the product.
3. Rinse container with pool water and shake to ensure all product is removed from the bottom of the bottle.
4. Pour remaining rinse solution into skimmer or pool.

Tips:

Note: If CYA level is less than 30 ppm, calculate the gallons of Instant Pool Water Conditioner needed using the following formula: 4 oz added to 10,000 gallons = 1 ppm increase of conditioner stabilizer level.

Features & Benefits:

• Liquid stabilizer that is much easier to add than traditional granular products
• Dissolves instantly
• Pool friendly pH is easy on surfaces and equipment
• Protects chlorine immediately

Natural Chemistry item number: 07401

1 gallon bottle.