Natural Chemistry Pro Series Dual Action Algaecide, Gallon

Pro Series Dual-Action Algaecide is a highly effective fast acting swimming pool algae destroyer. This product kills all types of pool algae: black algae, green algae, and mustard algae. This product is formulated to complement most swimming pool sanitizers. This product is effective and non-staining when used as directed. When used as directed you will see results in 24 hours. Pro Series Dual-Action Algaecide is non-foaming and can be used in pools with attached spas or jetted returns.

• Do not use in pools sanitized with biguanides or pools treated with hydrogen peroxide
• Prior to the initial application of this product, test pool water for the presence of metals. If metals are present, apply a metal stain preventative per label directions
• When using other products, always follow label directions for those products
• In use dilution, this product is non-staining to pool surfaces and equipment. Full strength product will stain porous pool surfaces

Directions for use:

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label and use strictly in accordance with precautionary statements and directions.

Prior to application:

1. Ensure all equipment is working properly. If necessary, clean the filter system
2. Adjust pH between 7.2-7.6
3. Establish and maintain proper chlorine or bromine levels. In chlorine-treated pools, add stabilizer to establish a minimum level of 30-40ppm of cyanuric acid to reduce the degrading effects of sunlight on chlorine residual
4. Vacuum leaves and any other foreign debris from pool
5. Brush visible algae thoroughly from the pool’s surface with a surface-compatible brush

To prevent pool algae:

1. Initially apply 8 fluid ounces of this product per 10,000 gallons of pool water with pump and filter operating
2. Thereafter, for weekly application intervals, add 1.5 fluid oz per 10,000 gallons of pool water. For two week application intervals, add 3 fluid oz per 10,000 gallons of pool water every other week. Apply more often if pool volume is diluted by heavy rain, frequent backwashing or partial drain/refill
3. Wait at least 15 minutes after application before entering pool

To treat visible pool agae:

1. Apply a shock per label directions
2. Allow to circulate for 1 hour
3. With pump and filter operating, apply 16 fluid oz of this product per 10,000 gallons of pool water directly to the pool water in areas of heaviest algae growth
4. Continuously circulate pool water for 24 hours
5. The next day, thoroughly brush pool surfaces
6. Prior to re-entry, test chlorine level. Do not enter pool until chlorine level is between 1-4ppm
7. In cases of persistent algae, repeat brushing and product application after 2-4 days
8. The use of a filter aid will enhance filter efficiency and algae removal
9. Chemically cleaning the filter 3 to 4 days after treatment improves results

This item contains hazardous substances in limited quantities and may be restricted from air shipment. If you require expedited shipping, please contact us to discuss your options.